東菱產品中心
-
耐磨試驗機
-
線材伸長率試驗機
- 插拔力試驗機
- 拉力試驗機
- 振動試驗機
- 跌落試驗機
-
頭戴式耳機試驗機
-
彎折試驗機
-
線材彎折試驗機
-
手機/電腦/電子產品檢測設...
-
環境試驗設備
-
電線電纜檢測設備
-
紙品包裝檢測設備
- 手機電腦檢測設備
-
箱包手袋檢測設備
-
紡織服裝檢測設備
- 橡膠塑料檢測設備
-
家私玩具檢測設備
-
油漆涂料檢測設備
-
插頭插座檢測設備
產品詳情
簡單介紹：
本插頭引線彎折試驗機專門測試 AC / DC 插頭引出線及電線之耐折強度。試是將試樣固定在夾具上加一定荷重及彎曲一定次數后檢視其斷線率。
詳情介紹：
UL817、CSA22.2、IEC884-1、CCC、GB2099.1、VDE、SAA、JIS
本插頭引線彎折試驗機專門測試 AC / DC 插頭引出線及電線之耐折強度。試是將試樣固定在夾具上加一定荷重及彎曲一定次數后檢視其斷線率。
This tester is specialized in testing the flexing endurance between power cord and blades，and is capable of testing the flexibility resistance of the cord itself。Samples are to be secured in the jaws of the flexing apparatus，and cord is to hang vertically with the weight tied on the lower end of it。The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position。After a certain cycles is reached or until specimen is broken，detect the breakage ratio or calcuate the total cycles。This machine is able to auto-count and auto-stop during specimen broken。
本插頭引線彎折試驗機專門測試 AC / DC 插頭引出線及電線之耐折強度。試是將試樣固定在夾具上加一定荷重及彎曲一定次數后檢視其斷線率。
This tester is specialized in testing the flexing endurance between power cord and blades，and is capable of testing the flexibility resistance of the cord itself。Samples are to be secured in the jaws of the flexing apparatus，and cord is to hang vertically with the weight tied on the lower end of it。The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position。After a certain cycles is reached or until specimen is broken，detect the breakage ratio or calcuate the total cycles。This machine is able to auto-count and auto-stop during specimen broken。
試料數量 Specimen Volume | 1 組（或 6 組） |
擺動角度 Flexing angles | 左右各 180º（或任意角度）連續設定，兩方向可以不對 稱，數字鍵盤設定數值，精度：0.1 度 |
擺動速度 Flexing speed | 10 ~ 60c.p.m 可調節，數字鍵盤設定 |
自動計數器 Auto - counter | 1~999999次，可預置 |
荷重 Load | 50g、100g、200g、300g、500g 各 1 個 |
控制系統 Control | 伺服系統 |
負載電壓 Load Voltage | 0 ~ 280V 連續可調 |
負載電流 Load Current | 0 ~ 30A 連續可調 |
其它功能 Other function | 所有數據為 16 x 2 LCD（帶背光源）數字顯示，具有斷線 停機，數據保持功能及密碼功能，防止隨意調節。 |
電源 Power | AC220V / 50Hz |